Rear Fender
Disassembling Rear Fender
●Disassemble the screw [A] and then remove the rear fender bracket
from the frame
●Unplug the rear turn signal and rear license plate lamp connectors
●Removing:
Rear fender left part [A]
Rear fender right part [B]
Rear fender bracket [C]
Rear turn signal [D]
Rear license plate lamp [E]
Rear license plate bracket [F]
Rear reflector [G]
Installing Rear Fender
●Install the parts disassembled previously.
Torque of rear fender bracket fastening screw: 10 N·m
6-107
To Next Page
