Fuse
Fuse Disassembly
●Disassemble the seat (see the seat disassembly section in the
chapter of frame)
●Disassemble the safety guard on the right side
● Squeeze the latches [A] and open the cover
●Use sharp-nose pliers to pull the fuse up and out of the fuse box
Fuse Installation
★If the fuse break down during operation, check the electrical system to figure out the cause, and then replace the fuse
with a new one with suitable ampere
●Install the fuse box at the position specified originally on the cover
7-41
To Next Page
Loading...
