Benelli TNT 25 - Regular Maintenance Table

Regular Maintenance Table
T
o keep good running state of motorcycle, regular maintenance must be conducted according to the following
table. The maintenance for the first time is very important, so it should not be neglected.
Regular Check Table
Frequency
Item
Whichever is the earlier Odometer reading
×1000 km
Page
Interval
1
6
12
18
24
30
36
Fuel Injection System
Page 103
Throttle control system (running, smooth return, no
clogging)—check
1 year • • • •
Idle speed—check
•
.•
•
•
Fuel leakage (fuel hose) —check
1 year
•
•
•
•
Fuel hose damage —check
1 year
•
•
.•
.•
Fuel hose installation state —check
1 year
•
•
-•
•
Function of evaporative emission control system—check
(model of CAL and SEA)
Cooling system
Coolant level—check
•
•
.•
•
Coolant leakage (radiator hose and radiating pipe) —check
1 year
•
.•
•
•
Damage of radiator hose—check
1 year
•
•
•
.•
Radiator hose installation state —check
1 year
•
•
•
•
Engine cylinder head and cylinder head cover
Valve
clearance
—check
Model of US, CA, AU
•
Other models except US, CA, AU
Every 42000 km
Damage of air suction system—check
•
•
•
Clutch
Clutch operation mechanism (running, detaching,
engagement)—check
• • • •
Free play of clutch handle
1 year
Wheels and tires
Tire pressure—check
1 year
•
•
•
Wheel/tire damage—check
•
•
•
Tire tread wear, abnormal wear—check
•
•
•
Wheel bearing damage—check
1 year
•
•
•
Final drive mechanism
Lubrication state of drive chain—check#
Every 600 km
Drive chain loosening—check#
Every 1000 km
Drive chain wear—check#
•
•
•
Chain guide wear—check
•
•
•
Brake
Brake fluid leakage (brake hose)—check
1 year
Damage of brake hose—check
1 year
Installation state of brake hose—check
1 year
Brake operation (effectiveness, running, no
resistance)—check
1 year
Brake fluid level—check
6 months
Brake pad wear—check#
Operation of brake lamp switch—check
2-3