Benelli TNT 25 User Manual

Abbreviations
A Ampere lb Pound
ABDC After bottom dead center m Meter
AC Alternating current min Minute
ATDC After top dead center N Newton
BBDC Before bottom dead center Pa Pascal
BDC Bottom dead center PS Horsepower
BTDC Before top dead center psi Pound per square inch
℃
Degree celsius r Revolution
DC Direct current rpm Revolutions per minute
F Farad TDC Top dead center
℉
Fahrenheit degree TIR Total indicator reading
ft Foot V Volt
g Gram W Watt
h Hour Ω Ohm
L Liter
3

Benelli TNT 25 Specifications

General

Displacement	249 cc
Bore x Stroke	72 mm x 61.2 mm
Compression Ratio	11.2:1
Max Torque	21.61 Nm @ 8000 rpm
Transmission	6-speed
Starting System	Electric
Clutch	Wet multi-plate
ABS	No
Front Tire	110/70-17
Rear Tire	150/60-17
Length x Width x Height	2080 mm x 810 mm x 1125 mm
Seat Height	780 mm
Kerb Weight	159 kg
Fuel System	Fuel Injection
Ignition	Digital
Front Suspension	Telescopic forks
Rear Suspension	Mono-shock
Front Brake	Disc
Rear Brake	Disc
Engine Type	Single cylinder, 4-stroke, liquid-cooled, DOHC