General Technical Parameter
Item BJ250-15A
BJ250-15 (Non-Europe)
BJ250-15 (Europe
)
Frame
Type
Caster angle (angle)
Tail
Front tire :
Type :
Dimension :
Tire pressure
Wheel type
Rim dimension
Rim material
Rear tire :
Type
Dimension
Tire pressure
Wheel type
Rim dimension
Rim material
Front suspension system :
Type
Total travel
Rear suspension system :
Type
Total travel
Brake type :
Front wheel
Rear wheel
S
teel Tube Trellis Frame
23°
94 mm
T
ubeless tire
110/70-17
220±10kPa
12-spoke aluminium alloy
17×MT3.50
Aluminium alloy
T
ubeless tire
140/60-17
250±10kPa
12-spoke aluminium alloy
17×MT4.50
Aluminium alloy
Inverted, extension-sleeve, oil damping absorber
125mm
M
onocular, hydraulic spring, damping absorber
51mm
S
ingle disc φ280mm
Single disc φ240mm
Electrical equipment
Battery
Head lamp :
Type
Bulb:
High beam lamp
Low beam lamp
Tail light/stoplight
Alternating-current generator:
Type :
Rated output power
12V-6A
h
S
emi-closed reflected light beam
(
Quartz halogen lamp)
(Quartz halogen lamp)
12V/(LED)
T
hree-phase alternating-current generator
12.8V//225W/5000rpm
I
f some changes are made, there will be no further notice and the changes may not be applicable in every country.
1-18
To Next Page
