EasyManua.ls Logo

BERTHOLD TECHNOLOGIES LB4710-080 - 1.3 Radiation Protection Courses

Default Icon
227 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1 General Information
Mini-Switch LB 471
1.3 Radiation Protection Courses
Special course in radiation protection
(Duration: 2 days)
This course is needed if the participant has not yet received any
radiation protection training. A successfully completed course
has a validity of 5 years.
Refreshing course in radiation protection
(Duration: 1 day)
All persons who have already successfully completed the spe-
cial course may refresh their special knowledge with this course
(Radiation Protection Ordinance of August 1, 2001).
A successfully refreshing course has a validity of 5 years.
1.4 Definitions
Automatic
Some parameters can either be set to the automatic or manual
mode. In the automatic mode the value is calculated using a
formula. Enter -1 to enable the automatic mode. The inverted C
in the top row indicates whether a parameter has been set to
automatic.
EVU
Evaluation Unit
Edit
Change value
Edit mode
In this mode, a value can be changed. Not every parameter can
be changed since some parameters are only used as display
values. Editable Parameters can be set to the edit mode with
the Enter button. In the edit mode the cursor positioned over
a digit is flashing.
GM detector
Detector with Geiger-Müller counter tube
NaI detector
NaI = sodium iodine crystal = scintillator
Scintillation detectors are very sensitive to Gamma radiation.
See pages 40 and 121.
Super-Sens detector
Detector which is highly sensitive to Gamma radiation with
large-volume plastic scintillator 150x150mm
See pages 43 and 125.
Limit value
Count rate or percentage value upon reaching the measure-
ment level

Table of Contents

Related product manuals