Chapter 8 Appendix
Mini-Switch LB 471
Chapter 8. Appendix
Start-up Protocol
Standard Mode Parameters
Operation mode Standard/Professional
Nuclide: 0=Co-60, 1=Cs-137
Max. or min. limit value switch
0=Max, 1=Min
Empty count rate (no input)
Full count rate (no input)
Zero count rate (no input)
Depending on
detector code
Detector software (only FSK
5
)
Detector temperature °C (only FSK
1
)
Detector high voltage (only FSK
1
)
Detector HV default (only FSK
1
)
FSK = Detector with scintillator and FSK communication