BERTHOLD TECHNOLOGIES LB4710-080 - Dismantling the Nai Detector

Chapter 9 Maintenance
Mini-Switch LB 471
81
9.4.1 Dismantling the NaI Detector
The following parts are available as spare parts for the NaI detec-
tor and may be replaced.
 Crystal-multiplier combination
 Crystal
 Multiplier
 Detector electronics complete with base
 Detector case
 Detector cover
 Screwed cable gland
Caution!
Risk of poisoning!
If you touch the coupling ring (see Figure 43) made of lead (only
with NaI detector 50/50) there is the risk of poisoning.
Wear protective gloves or wash your hands after installation.
Parts to be replaced