BERTHOLD TECHNOLOGIES LB4710-080 - Enter Parameter Value; Reading-In the Count Rate

Chapter 2 Operation
Mini-Switch LB 471
12
2.1.7 Enter Parameter Value
This process will be explained by using the date in code 02 as an
example.
The date (MM.DD) is to be updated.
Old date: 09.25 (September 25)
Current date: 11.30 (November 30)
Enter value:
1
Select code 02 with / .
2
Select edit mode with – the left digit is flashing.
3
Select the digit you want to edit with /
.
4
Edit the respective digit with / .
5
As soon as all digits match the current date, push to con-
firm your entry.
 The value is saved and the edit mode terminated.
2.2 Reading-in the Count Rate
To determine the count rate at the respective level, the container
has to be filled or emptied accordingly. The level must not change
while reading in the count rates. Through reading-in, statistical
fluctuations are filtered out. You can enter count rates in the fol-
lowing parameters: 30, 31, 32, 18.
Enter
Enter
C 02
11.30
C 02
09.25