Chapter 2 Operation
Mini-Switch LB 471
5
Push to select the second digit from the right.
6
Set digit with button to „–„.
7
Confirm with .
The selected parameter is set to the automatic mode.
The C in the top row is displayed inverted.
Turn off automatic mode
The automatic mode of a parameter can be overwritten any time
by entering a fixed value >0 to set the instrument to the manual
mode.
1
Select the respective parameter.
2
Enable edit mode with
3
Enter numerical value > 0.
The selected parameter is set to the manual mode by
entering a fixed value. The C in the top row is no longer
inverted.
To Next Page
Loading...
