Chapter 6 Water Cooling
Mini-Switch LB 471
In a Super-Sens with water cooling, the water cooling device is
integrated in the case. The water cooling comprises two cooling
jackets which have to be connected with each other during instal-
lation.
Water inlet
Water outlet
Connection between
both cooling jackets
The cooling water flow must not be turned off if the maximum
ambient temperature of the detector (see technical data in chapter
13.2) will be exceeded even if the facility is not in operation.
In case of danger of frost the water cooling has to be emptied.
Dirty cooling water may block up the water cooling so that the
detector may get overheated and destroyed. Make sure to use
clean cooling water!
Super-Sens with
water cooling
To Next Page
Loading...
