Chapter 8 Electrical Installation
Mini-Switch LB 471
5
If necessary, place screen separately on the cable bushing.
Screwed cable gland
Install screwed cable
gland on line
Screen
6
Connect line to terminals 6 (+) and 2 (-)
Terminal 6 (+)
Cable bushing PG 16
7
Attach cover again and fix it.
8
Connect grounding on the outside of the grounding screw at
the detector.
9
Place wires on evaluation unit. See connection diagram on
page 137.
Figure 38:
Terminal assignment
GM detector
To Next Page
Loading...
