BK Precision 9140 Series User Manual

Data Logger 59
6.2 Parameters
6.2.1 Sampling Interval
Press the button then use the soft key to select Data logger > Sampling Interval.
Use the numeric keypad or rotary motor to select the sampling interval. Press to assign the selected
value. (.2s to 300s)
6.2.2 File Path
Press the button then use the soft key to select Data logger > File Path.
Using the rotary knob and navigate through the le path of the USB. Once the desired location
has been found select save by pressing the softkey furthest to the left.
Verify that the correct path was chosen in the Data Logger menu.
Figure 6.2 File Path Selected
6.2.3 T. Stamp Filename
Press the button then use the soft key to select Data logger > T. Stamp Filename
Toggle to enable/disable time and date on the le name.
Example Enabled 9140_log_20201017002307
Disabled 9140_log
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

BK Precision 9140 Series Specifications

General

Brand	BK Precision
Model	9140 Series
Category	Power Supply
Language	English