Utilities Menu 79
Change Code
Changes the security code.
Press the button then use the soft key to select Utilities > Test/Admin > Security > Change
Code.
Calibrate
Enter calibration mode.
Press the button then use the soft key to select Utilities > Test/Admin > Security > Calibrate .
See chapter Calibration Adjustment Procedure to adjust the units calibration.
Firmware Update
Update the rmware and module. Press the button then use the soft key to select Utilities >
Test/Admin > Security > Firmware Update .
NISPOM
Select for complete memory wipe. Press the button then use the soft key to select Utilities >
Test/Admin > Security > NISPOM .
Lock
Sets security status to Lock. Press the button then use the soft key to select Utilities > Test/Admin
> Security > Lock .
If Done is selected without locking the security settings, the user will be prompted that the security settings
will not be locked.
7.6 Error Log
View up to 50 previously set error codes.
Press the button then use the soft key to select Utilities > Error Log.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General
