Save/Recall 85
Using the rotary knob navigate through the le paths of the USB. Use the button to expand folders.
Once the desired location has been found press Save.
The output settings will be saved after a short delay.
Figure 9.2 Save to USB
9.2 Recall the Instrument’s Settings
Recall previously saved output settings from the internal memory. A total of 10 (0 to 9) user settings can
be saved.
To recall settings :
Press the button then use the soft keys to select Recall > Recall from INT.
Use the numeric keypad to enter a number from 0 to 9 to recall the output settings stored in that address.
The settings will be recalled after a short delay.
Recall from USB
Recall the instrument’s output settings from a USB drive.
Press the button then use the soft keys to select Recall > Recall from USB.
Use the rotary knob to navigate through the le paths of the USB. Use the button to expand folders.
Once the desired location has been found press Load.
The settings will be recalled after a short delay.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General
