Utilities Menu 65
7.2 Remote Interface
The 9140 series supports remote communication on up to three interfaces: USB, LAN, and GPIB (optional).
While in remote mode the screen displays “RMT” in the upper right corner. Switching to remote mode
does not impact the supply’s output parameters.
In remote mode, front panel operation is disabled. Only the Local button is enabled. Revert to manual
mode by pressing the key or by sending the command SYST:LOC.
The webserver remote interface requires the password BK to login.
Select and congure the following interfaces:
• USB
• LAN
• GPIB
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General
