20
(12) Rotary knob:
Use this knob to adjust voltage or current when the output is ON (press
first to let cursor display first).
(13) Enter :
This key is used to confirm any changes to the settings within the menu
or the voltage and current setting value.
(14) Mem :
Press this key to access the instrument settings memory location. Users
can then use the numerical key or knob to select the memory location to
save or recall the voltage and current configuration by pressing the
STORE or RECALL key. 10 memory locations are available.
(15) Menu :
Use this key to enter the power supply’s menu. Users can press
or
key to browse through select the options in the menu list or
use the numerical keys to enter the corresponding menu option number
in the list.
To Next Page
Loading...
Need help?
General
