72
4.5 SCPI Conformity Information
The power supply is compatible with all IEEE-488.2 and SCPI commands
(1995). Commands are included in SCPI commands (in Vol. 2, 1995).
4.5.1 Common SCPI commands
Command Explanation
*CLS Clear status (include error code)
*IDN? Response:<Manufacturer>, <model>, <serial number>,
<
firmware type, & version >
*RCL
Recalls settings from memory. Memory numbers from 0
to 9 are valid.
*RST Resets the power supply to its power on state.
*SAV 1.
S
aves defined parameters
2
.
S
aves current settings to memory. Memory numbers
from 0 to 9 are valid.
Examples:
Q 23:How to store the voltage/current settings to memory devices?
==>save current settings to memory location 5
Q 24:How to recall the voltage/current settings from memory
devices?
==>recall setting from memory location 3
Q 25:How to set up software reset?
*RST
Q 26:How to identify the instrument’s model number?
*IDN?
Q 27:How to clear error message?
To Next Page
Loading...
Need help?
General
