BK Precision XLN3640 - SCPI Command Subsystem

73
*CLS
4.5.2 SCPI Command subsystem
ABORt
Abort the Output Action
FETCh Fetch Subsystem
:CURRent? Return the fetched output current
:VOLTage? Return the fetched output voltage
MEASure Measure subsystem
:CURRent? Return the measured output current
:VOLTage? Return the measured output voltage
MEMory Memory Subsystem
<NR1 | ? > select or return memory number, range
from 0 – 9
:VSET <NRf | ? > set or return voltage
:ISET <NRf | ? > set or return current
:SAVE store memory subsystem parameters
OUTput Output Subsystem
<Boolean > enable or disable output action
? return output state
:LIMit
:V
OLTage <NRf | ? > set or return voltage limit value
:CURRent <NRf | ? > set or return current limit value
:SR
:V
OLTage <NRf | ? > set or return voltage slew rate value
:CURRent <NRf | ? > set or return current slew rate value
:STATe? Return output mode (CV or CC)