56
5.7 Low Voltage Protection (ACD)
When the machine has detected abnormally low AC power input, system will
enter the “AC Detect Low Protect” mode that will shut off output and display
the error message shown in the following figure. Press to reset the
protection and deactivate buzzer.
L
! ! ! !
.
.
L
L
5.8 Error Input Message
When users enter a voltage or current setting that is beyond the acceptable
range, system will display “RANGE ERROR” in response and show users the
correct input range. Press to re-enter the voltage/current setting.
!!!!
:
:
.
63
.
To Next Page
Loading...
Need help?
General
