BK Precision XLN3640 - Page 182

86
commands to control individually addressed power
supplies with RS-485 connection.
Description:
Selects the address of the power supply to be
controlled.
Syntax: CADR<SP><address>
<address> - 1 – 30 are valid numbers.
Example: CADR 5
This will select power supply with address = 5.
CCLS
Description:
Clears the status of the selected power supply.
Syntax:
CCLS
CRST
Description:
Resets the selected power supply to a known state.
Syntax:
CRST
CIDN?
Description:
Queries the IDN information of the selected power
supply. This command functions the same as
*IDN?, however this is used in a multi unit
programming setup for the selected power supply.
Query:
CIDN?
Return
String:
B&K PRECISION,XLN15010,SN#,fw_version,0
CREV?