D9412GV4/D7412GV4/D7212GV4 Panel and Area Wide Parameters | en 109
Bosch Security Systems, Inc. Program Entry Guide F.01U.218.312 | 04 | 2012.03
Change a user passcode.
L## Add User
Add or change users, add or change authority levels, add or change tokens or cards.
L## Del User
Delete users.
L## Extend Close
Change the closing time in the area where the function is entered.
L## View Log
View all panel-wide events in the control panel’s memory log.
L## Print Log
Print all panel-wide events from the log to the printer in the area where the user is executing
this function.
Default: Authority Levels 1, 15: Enabled (E)Authority Levels 2-14: Blank (-)
Selection: - or E
Function No. Function Name Alternate Keystroke
18 Add User [COMMAND][5][6]
NOTICE!
D9210 NOT READY appears if a door controller is not assigned to the keypad used to add or
change tokens or cards. Refer to CC# Assign Door in Section 3.11.1 Keypad (Command Center)
Assignment, page 79.
Default: Authority Levels 1, 15: Enabled (E)Authority Levels 2-14: Blank (-)
Selection: - or E
Function No. Function Name Alternate Keystroke
19 Delete User [COMMAND][5][3]
Default: Authority Levels 1, 15: Enabled (E)Authority Levels 2-14: Blank (-)
Selection: - or E
Function No. Function Name Alternate Keystroke
20 Extend Close [COMMAND][5][1]
Default: Authority Levels 1, 15: Enabled (E)Authority Levels 2-14: Blank (-)
Selection: - or E
Function No. Function Name Alternate Keystroke
21 View Log (Menu funtion only)
Default: Authority Levels 1, 15: Enabled (E)Authority Levels 2-14: Blank (-)
Selection: - or E
Function No. Function Name Alternate Keystroke
22 Print Event Log (Menu funtion only)
NOTICE!
This item can also be accessed using the Service Menu ([9][9][ENT]).
To Next Page
Loading...
