Bosch D7412GV4 - B94 x;B93 x Events Menu; View Event Memory

110 en | Panel and Area Wide Parameters D9412GV4/D7412GV4/D7212GV4
F.01U.218.312 | 04 | 2012.03 Program Entry Guide Bosch Security Systems, Inc.
L## User Command 7
This command can be used in Function Menu. Generate the alarm programmed at COMMAND
7 in the POINTS > Command 7 / Command 9 section.
L## User Command 9
This command can be used in Function Menu. Generate the alarm programmed at COMMAND
9 in the POINTS > Command 9 / Command 9 section.
L## Bypass a Point
Bypass points with this authority level.
L## Unbypass a Point
Unbypass points with this authority level.
L## Reset Sensors
Reset sensors with this authority level.
L## Change Relay
Manually activate or reset a system relay.
Default: Authority Levels 15: Enabled (E)Authority Levels 1-14: Blank (-)
Selection: - or E
Function No. Function Name Alternate Keystroke
23 User Command 7 [COMMAND][7]
Default: Authority Levels 15: Enabled (E)Authority Levels 1-14: Blank (-)
Selection: - or E
Function No. Function Name Alternate Keystroke
24 User Command 9 [COMMAND][7]
Default: Authority Levels 1-4, 15: Enabled (E)Authority Levels 5-14: Blank (-)
Selection: - or E
Function No. Function Name Alternate Keystroke
25 Bypass a Point [COMMAND][0]
Default: Authority Levels 1-4, 15: Enabled (E)
Authority Levels 5-14: Blank (-)
Selection: - or E
Function No. Function Name Alternate Keystroke
26 Unbypass a Point [COMMAND][0][0]
Default: Authority Levels 1-4, 15: Enabled (E)Authority Levels 5-14: Blank (-)
Selection: - or E
Function No. Function Name Alternate Keystroke
27 Reset Sensors [COMMAND][4][7]
Default: Authority Levels 1-2, 15: Enabled (E)Authority Levels 3-14: Blank (-)
Selection: - or E
Function No. Function Name Alternate Keystroke
28 Change Relay [COMMAND][5][4]
NOTICE!
Do not use the Change Relays function to toggle relays reserved for special functions. Special
function relays are Area and Panel Wide Relay functions as well as relays assigned to CC#
Enter Key Relay?