Bowa ARC 400 - Page 105

6 Detecting and correcting faults
BOWA-IFU-11779-ARC400-V2.1.0-S0-EN Operating Manual ARC 400 105
Heading
Fault message
Dr. Dongle Warning
A fault occurred while loading the program.
No changes have been made.
If the warning message persists, please contact the
Technical Support.
Contact: MENU - SERVICE.
Dr. Dongle Warning
The selected program does not have any parameters.
Put a valid program in this memory or select a different
memory location.
Internal Error XXXX
(z.B. mit XXXX =
4183)
If this message appears again, please contact the Technical
Support. Contact: MENU - SERVICE.
Internal Errors have a number next to the description.
Please advise the Technical Service of this number.