Bowa ARC 400 - Page 143

10 Technical specifications
BOWA-IFU-11779-ARC400-V2.1.0-S0-EN Operating Manual ARC 400 143
Monopolar Coagulation – Laparoscopy
Measurement at ohmic resistances
 Diagram of power output P [W] as a
function of the load resistance R [] for
the setting "Monopolar Coagulation
Laparoscopy"
= 60 W
Measurement at ohmic resistances
 Diagram of power output P [W] as a
function of the load resistance R [] for
the setting "Monopolar Coagulation
Laparoscopy"
= 120 W
 Diagram of power output P [W] as a
function of the setting "Monopolar
Coagulation Laparoscopy"
Rated load resistance = 500 
 HF output voltage U [Vp] for the setting
"Monopolar Coagulation Laparoscopy"
(idle mode)
= 1800 Vp