Disassembly / Assembly SpaceStation
3
3- 14 SpaceStation, 1.0 gb
1.0
7. Release all rotary knobs (Abb.: 3 - 14 / Item 1) of the module
lock.
Note
Put a release button on the release shaft without engaging it to
unlock the rotary knobs. To lock the rotary knobs press them si-
multaneously in by hand per slot.
8. Press 8 seals M-2K (Abb.: 3 - 14 / Item 2) carefully out of the
housing, press the rotary knobs in the locking position and
pull the seals M-2K off the rotary knobs.
Abb.: 3 - 14
Legende zu Abb. 3 - 14:
ItemDesignation
1 Release button
2Seal M-2K
1
2
To Next Page
Loading...
