Disassembly / Assembly SpaceStation
3
SpaceStation, 1.0 gb 3- 23
1.0
4. Tighten the data connector holder screw with a torque of
0.25 – 0.05 Nm.
5. Before fitting the M-2K seals check them for damage and re-
place if necessary.
Release Button
Note
Check the release buttons for damage, especially within the notch
area, before fitting the buttons.
Abb.: 3 - 26
Legende zu Abb. 3 - 26:
ItemDesignation
1 Screw EJOT 30x9 WN 5452 TORX 10IP A2
2 Data connector holder
1
2
To Next Page
Loading...
