Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 160
Broadcom Confidential and Proprietary
Description: Configure diagnostics parameter for Memory tests and Manufacturing test
(NIC test).
Syntax: diagcfg
Example:
0:> diagcfg
Diagnostics Configuration Menu
1. Memory Test Configuration Menu
2. Test Configuration Menu
3. Driver Configuration Menu
4. Abort On Failure is enabled
5. Save Configuration
Enter your choice or ESC to exit -> 1
Memory Test Configuration Menu
1. SRAM BD1 Start (0x00000000-0x00000fff) : 00000000
2. SRAM BD1 End (0x00000000-0x00000fff) : 00000fff
3. SRAM BD2 Start (0x00004000-0x00007fff) : 00004000
4. SRAM BD2 End (0x00004000-0x00007fff) : 00007fff
5. SRAM DMA Start (0x00002000-0x00003fff) : 00002000
6. SRAM DMA End (0x00002000-0x00003fff) : 00003fff
7. SRAM MBUF Start (0x00008000-0x00015fff) : 00008000
8. SRAM MBUF End (0x00008000-0x00015fff) : 00000000
9. SRAM SPAD Start (0x00030000-0x00037fff) : 00030000
10. SRAM SPAD End (0x00030000-0x00037fff) : 00037fff
11. Ext. SRAM Start (0x00020000-0x00ffffff) : 00020000
12. Ext. SRAM End (0x00020000-0x00ffffff) : 00ffffff
13. MBUF Bank (1 - Odd ; 2 - Even ; 3 - Both) : 3
0. Exit to previous menu
Enter your choice (option=paramter) -> 0
Diagnostics Configuration Menu
1. Memory Test Configuration Menu
2. Test Configuration Menu
3. Driver Configuration Menu
4. Abort On Failure is enabled
5. Save Configuration
Enter your choice or ESC to exit -> 2
Test Configuration Menu
A1. Indirect Register.................: Enabled
A2. Control Register..................: Enabled
A3. Interrupt.........................: Enabled
A4. Built In Self.....................: Enabled
A5. PCI Cfg Register..................: Enabled
B1. Scratch Pad.......................: Enabled
B2. BD SRAM...........................: Enabled

Broadcom NetXtreme Specifications

General

Manufacturer	Broadcom
Product Line	NetXtreme
Category	Adapter
Connector Type	RJ45
Supported OS	Windows, Linux
Features	TCP/IP Offload