Broadcom NetXtreme - Page 49

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 49
Broadcom Confidential and Proprietary
Example 1:
; This is comment line
// This also can be used as comment line
// Blank line is also allowed
// This is Broadcom’s MAC prefix
MAC_PREFIX = 00:10:18
POWER_DISSIPATCHED = 10:0:0:100
POWER_CONSUMED = 10:0:0:100
SUBSYSTEM_VENDOR_ID = 14e4
SUBSYSTEM_DEVICE_ID = 1644
pxe = disable
PXE_Speed = 100fd
WOL = enable
Product_name = Broadcom Gigabit Ethernet Controller
PART_NUMBER = BCM95700A6
ENGINEERING_CHANGE = 106679-15
MANUFACTURING_ID = 14e4
Asset_Tag = XYZ1234567
DUAL_MAC_MODE = normal
MBA_BOOT_PROTOCAL = pxe
MBA_BOOTSTRAP_TYPE = bbs
MBA_DELAY_TIME = 6
EXPANSION_ROM_SIZE = 128K
DESIGN_TYPE = nic
; select other channel
MAC = 1
PXE = enable
Example 2:
; A. Super-airplane Mode (enable/disable)
super_airplane_mode = disable
; C. NIC Design (nic/lom)
nic_design = lom
; D. L1 PLL Disable (yes/no)
l1_pll_disable = no
; E. Clkreq (enable/disable)
ClkReq = disable
; F. PCIE Link Polarity Fix Dis (yes/no)
pcie_link_polarity_fix_dis = no
; G. L1ASPM Debounce En (yes/no)
L1ASPM_Debounce_En = no
; MBA 1. VLAN Enable (yes/no)
vlan_enable = yes
; MBA 2. VLAN ID (0..4095)
vlan_ID = 4095
; MBA 8. LINK SPEED (auto/10hd/10fd/100hd/100fd)
link_speed = 10fd