Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 71
Broadcom Confidential and Proprietary
Enable (1) Enable
58
Link Speed Power
Configure
Description:
Enable Link Speed Power for Taishan, Caesar_II and Soledad Devices only
Disable (0) Disable
Enable (1) Enable
59
Link Idle Mode
Configure
Description:
Enable Link Idle mode (CPMU equipped devices only).
Disable (0) Disable
Enable (1) Enable
60
NCSI pkg ID assign method (5718/5719/5720 only)
Configure
Description:
Setting method to assign NCSI pkg ID.
GPIO (0) By GPIO
NVRAM (1) By NVRAM
61
NCSI pkg ID assign value (5718/5719/5720 only)
Configure
Description:
Setting NCSI pkg ID assign value
62
NCSI BMC connection method (5718/5719/5720 only)
Configure
Description:
Setting method to connect BMC
RMII (0) Through RMII
SMbus (1) Through SMbus
63
NCSI SMbus Speed (5718/5719/5720 only)
Configure
Description:
Setting speed of NCSI SMbus
100 (0) 100 KHz
400 (1) 400 KHz
64
NCSI NIC SMBus Slave Address (5718/5719/5720 only)
Configure
Description:
Setting NCSI NIC SMbus Slave Address
65
NCSI BMC SMbus Slave Address (5718/5719/5720 only)
Configure
Description:
Setting NCSI BMC SMbus Slave address

Broadcom NetXtreme Specifications

General

Manufacturer	Broadcom
Product Line	NetXtreme
Category	Adapter
Connector Type	RJ45
Supported OS	Windows, Linux
Features	TCP/IP Offload