Brother DCP-L5652DN Service Manual

2-33
Confidential
Unusable Device Remove the Device.
Turn the power off and
back on again.
A USB device not within the
specification is connected to the
USB terminal, resulting in over
current.
EC00 2-81
- The connected USB device is not
supported.
--- 4.14.3
USB Device Error Only insert one USB
device at a time.
When the power switch was ON,
multiple USB flash memories are
connected to the USB host.
--- 4.14.3
Wrong Paper
Size T1
Reload correct paper
in Tray 1
or press [Retry].
When printing from the paper tray 1,
the size of paper set in the paper
tray 1 does not match the size
specified by the driver.
--- 4.14.1
Wrong Paper
Size T2
Reload correct paper
in Tray 2
or press [Retry].
When printing from the paper tray 2,
the size of paper set in the paper
tray 2 does not match the size
specified by the driver.
--- 4.14.1
Wrong Paper
Size T3
Reload correct paper
in Tray 3
or press [Retry].
When printing from the paper tray 3,
the size of paper set in the paper
tray 3 does not match the size
specified by the driver.
--- 4.14.1
Wrong Paper
Size T4
Reload correct paper
in Tray 4
or press [Retry].
When printing from the paper tray 4,
the size of paper set in the paper
tray 4 does not match the size
specified by the driver.
--- 4.14.1
Wrong Paper
Size T5
Reload correct paper
in Tray 5
or press [Retry].
When printing from the paper tray 5,
the size of paper set in the paper
tray 5 does not match the size
specified by the driver.
--- 4.14.1
Wrong Paper
Size MP
Reload correct paper
in MP Tray
or press [Retry].
When printing from the MP tray,
the size of paper set in the MP tray
does not match the size specified
by the driver.
--- 4.14.1
2-sided Disabled Close the Back Cover
and put the 2-sided
Tray back in.
The back cover/duplex tray sensor
detected that the cover was open
when duplex printing is started.
(Before registering printing data to
engine)
8903 2-65
The back cover/duplex tray sensor
detected that the cover was open
during duplex printing. (After
registering printing data to engine)
8904 2-65
Error message
Description
Error
codes
Refer
to:
First line Second line

Brother DCP-L5652DN Specifications

General

Printer Type	Laser
Functions	Print, Copy, Scan
Automatic Duplex Printing	Yes
ADF Capacity	50 sheets
Memory	256 MB
Processor	800 MHz
Monthly Duty Cycle	Up to 50, 000 pages
Print Speed	42 ppm
Print Resolution	1200 x 1200 dpi
Paper Input Capacity	250 sheets
Scanner Resolution	Up to 1200 x 1200 dpi
Connectivity	USB, Ethernet
Mobile Printing	Brother iPrint&Scan, Google Cloud Print, AirPrint, Mopria
Toner Yield	Standard: 3, 000 pages, High Yield: 8, 000 pages