5-76
Confidential
• Selector 7: Extension of the lower range of printable temperatures
Change the lowest printable temperature from 5 to 0 degree-C.
While switching from "Enable" to "Disable" takes effect without powering off and on
the machine, switching from “Disable” to “Enable” requires powering off and on to
take effect.
AMS07 (Printing assurance 5)
• Selector 1: Improvement of displaced ruled lines for A3/ledger/B4 size
Setting this selector to "1" switches to the unidirectional print mode with control
enabled for improving displaced ruled lines, in normal printing of A3/ledger/B4 size
plain paper.
• Selector 2: Improvement of displaced ruled lines for A4/letter size
Setting this selector to "1" switches to the unidirectional print mode with control
enabled for improving displaced ruled lines, in normal printing of A4/letter size
plain paper.
• Selector 3:
Improvement of displaced ruled lines for sizes other than A3/ledger/B4/A4/letter size
Setting this selector to "1" switches to the unidirectional print mode with control
enabled for improving displaced ruled lines, in normal printing of plain paper of
sizes other than A3/ledger/B4/A4/letter size.
Selector
No.
Function Setting and Specifications
1
Improvement of displaced ruled
lines for A3/ledger/B4 size
0: Disable (default) 1: Enable
2
Improvement of displaced ruled
lines for A4/letter size
0: Disable (default) 1: Enable
3
Improvement of displaced ruled
lines for sizes other than A3/
ledger/B4/A4/letter size
0: Disable (default) 1: Enable
4 Brother Paper mode 0: Disable (default) 1: Enable
5
Improvement of mist stains on
the second side
0: Enable (default) 1: Disable
6 Ignore the sensor for paper tray 2 0: Disable (default) 1: Enable
7
Disable display of MP tray setting
request screen
0: Disable (default) 1: Enable
8
Disable display of wrong setting
screen before printing
0: Disable (default) 1: Enable
To Next Page
Loading...
Need help?
General
