Canon imageCLASS MF264dw - Page 255

COPIER (Service mode for printer) > DISPLAY (State display mode)
COPIER (Service mode for printer) > DISPLAY (State display mode) > CCD
FB-TARGET-G Display shading target value (G)
Detail To display the shading target value of GREEN at copyboard reading.
Use Case
At scanned image failure
Adj/Set/Operate Method
N/A (Display only)
Display/Adj/Set Range
128 to 384
Related Service Mode
COPIER > ADJUST > CCD > FBTAR-G
FB-TARGET-R Display shading target value (R)
Detail To display the shading target value of RED at copyboard reading.
Use Case
At scanned image failure
Adj/Set/Operate Method
N/A (Display only)
Display/Adj/Set Range
128 to 384
Related Service Mode
COPIER > ADJUST > CCD > FBTAR-R
FB-TARGET-BW Display shading target value (B&W)
Detail To display the shading target value of B&W at copyboard reading.
Use Case
At scanned image failure
Adj/Set/Operate Method
N/A (Display only)
Display/Adj/Set Range
128 to 384
Related Service Mode
COPIER > ADJUST > CCD > FBTAR-BW
DF-TARGET-B Display shading target value (B): ADF
Detail To display the shading target value of BLUE at ADF stream reading.
Use Case
At scanned image failure
Adj/Set/Operate Method
N/A (Display only)
Display/Adj/Set Range
128 to 384
Related Service Mode
COPIER > ADJUST > CCD > DFTAR-B
Supplement/Memo
ADF model only
DF-TARGET-G Display shading target value (G): ADF
Detail To display the shading target value of GREEN at ADF stream reading.
Use Case
At scanned image failure
Adj/Set/Operate Method
N/A (Display only)
Display/Adj/Set Range
128 to 384
Related Service Mode
COPIER > ADJUST > CCD > DFTAR-G
Supplement/Memo
ADF model only
DF-TARGET-R Display shading target value (R): ADF
Detail To display the shading target value of RED at ADF stream reading.
Use Case
At scanned image failure
Adj/Set/Operate Method
N/A (Display only)
Display/Adj/Set Range
128 to 384
Related Service Mode
COPIER > ADJUST > CCD > DFTAR-R
Supplement/Memo
ADF model only
8. Service Mode
247