Canon imageCLASS MF264dw - FUNCTION (Operation; Inspection Mode)

FUNCTION (Operation / inspection mode)
■ CLEAR
COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > CLEAR
TEL-USER Clear user data and address data
Detail To clear the user data and the registered address data.
Adj/Set/Operate Method
Select the item, and then press OK or Start key.
Supplement/Memo
SSSW is not cleared.
SRVC-DAT Clear service data
Detail To clear service data.
Use Case
When clearing a service mode set up value.
Adj/Set/Operate Method
1) Select the item, and then press OK or Start key.
2) Turn OFF/ON the main power switch.
Supplement/Memo
User data is not cleared.
PWD-CLEA Clear system administrator password
Detail To clear the password of the system administrator set in the Settings/Registration menu.
Use Case
When clearing the password of the system administrator.
Adj/Set/Operate Method
1) Select the item, and then press OK or Start key.
2) Turn OFF/ON the main power switch.
CRG-LOG Clear cartridge log
Detail To clear the cartridge log.
Adj/Set/Operate Method
1) Select the item, and then press OK or Start key.
2) Turn OFF/ON the main power switch.
ALL Clear setting information
Detail The following data are cleared.
- User data
- Service data
- JOB ID
- Various Log
- Key log
- CRG-LOG
- All counter information (items of COPIER > COUNTER)
Use Case
When replacing the Main Controller PCB.
Adj/Set/Operate Method
1) Select the item, and then press OK or Start key.
2) Turn OFF/ON the main power switch.
Caution
USER DATA/SERVICE DATA is initialized to the default country setting.
● HIST
COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > CLEAR > HIST
ACT-HIST Clear communication management log
Detail To clear communication management logs.
Use Case
When clearing the communication management logs
Adj/Set/Operate Method
1) Select the item, and then press OK or Start key.
2) Turn OFF/ON the main power switch.
ACC-HIST Clear print log
Detail To clear print logs.
Use Case
When clearing print logs
Adj/Set/Operate Method
1) Select the item, and then press OK or Start key.
2) Turn OFF/ON the main power switch.
8. Service Mode
251