Canon imageCLASS MF264dw - Page 260

COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > CLEAR
COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > CLEAR > HIST
JAM-HIST Clear jam log
Detail To clear jam logs.
Use Case
When clearing jam logs
Adj/Set/Operate Method
1) Select the item, and then press OK or Start key.
2) Turn OFF/ON the main power switch.
ERR-HIST Clear error log
Detail To clear error logs.
Use Case
When clearing error logs
Adj/Set/Operate Method
1) Select the item, and then press OK or Start key.
2) Turn OFF/ON the main power switch.
■ MISC-R
COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > MISC-R
SCANLAMP Execute Scan Lamp activation operation
Detail To execute the scanning lamp activation operation (CIS LED R -> G -> B -> all of RGB - > OFF).
Adj/Set/Operate Method
Select the item
■ MISC-P
● OUTPUT
COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > MISC-P > OUTPUT
SRVC-DAT Output sys data list/sys dump list
Detail To output the system data list/system dump list.
Adj/Set/Operate Method
Select the item
Caution
When executing report output, be sure to load paper in the Pickup Tray and remove paper on the
Multi-purpose Tray.
If there are papers on the Multi-purpose Tray, report will not be output even papers are placed in
a cassette.
SYS-DAT Output system data list
Detail Service software switches and parameters which are used for FAX function are mainly output as
a report.
Adj/Set/Operate Method
Select the item
Caution
When executing report output, be sure to load paper in the Pickup Tray and remove paper on the
Multi-purpose Tray.
If there are papers on the Multi-purpose Tray, report will not be output even papers are placed in
a cassette.
Supplement/Memo
Fax model only
SYS-DMP Output system dump list
Detail Service data including number of communications, number of receiving pages and sending pages,
number of recording papers, number of errors are output.
Adj/Set/Operate Method
Select the item
Caution
When executing report output, be sure to load paper in the Pickup Tray and remove paper on the
Multi-purpose Tray.
If there are papers on the Multi-purpose Tray, report will not be output even papers are placed in
a cassette.
Supplement/Memo
Fax model only
8. Service Mode
252