Canon imageCLASS MF264dw - COPIER (Service Mode for Printer); DISPLAY (State Display Mode)

COPIER (Service mode for printer)
DISPLAY (State display mode)
COPIER (Service mode for printer) > DISPLAY (State display mode)
ERR Display error log
Detail To display the error log (max. 20 items).
Adj/Set/Operate Method
N/A (Display only)
JAM Display jam log
Detail To display the jam logs of the printer and ADF scanner (max. 20 items).
Display/Adj/Set Range
N/A (Display only)
■ VERSION
COPIER (Service mode for printer) > DISPLAY (State display mode) > VERSION
MAIN Display Main Controller Version
Detail To display the main controller version.
Use Case
When upgrading the firmware.
Adj/Set/Operate Method
N/A (Display only)
Display/Adj/Set Range
00.00 to 99.99
BOOT Display BOOT ROM version
Detail To display the version of boot ROM.
Use Case
When upgrading the firmware.
Adj/Set/Operate Method
N/A (Display only)
Display/Adj/Set Range
00.00 to 99.99
LANG Display Language pack version
Detail To display the version of Language pack.
Use Case
When upgrading the firmware.
Adj/Set/Operate Method
N/A (Display only)
Display/Adj/Set Range
00.00 to 99.99
ECONT Display Engine Controller version
Detail To display the version of the engine controller.
Use Case
When upgrading the firmware.
Adj/Set/Operate Method
N/A (Display only)
Display/Adj/Set Range
00.00 to 99.99
■ CCD
COPIER (Service mode for printer) > DISPLAY (State display mode) > CCD
FB-TARGET-B Display shading target value (B)
Detail To display the shading target value of BLUE at copyboard reading.
Use Case
At scanned image failure
Adj/Set/Operate Method
N/A (Display only)
Display/Adj/Set Range
128 to 384
Related Service Mode
COPIER > ADJUST > CCD > FBTAR-B
8. Service Mode
246