Canon imageCLASS MF264dw - NCU (NCU Parameter Setting Mode)

No. Parameter Possible setting range
047 Not used -
048 Not used -
049 NSX model ID 0 to 4,095
050 Not used -
051 Hook detection threshold value 0 to 9,999
052 Not used -
053 To set the number of DTMF calls at FAX remote recep-
tion.
0 to 9,999 times
(Default: 2)
054 Not used -
055 Not used -
056 Not used -
057 Not used -
058 Not used -
059 Not used -
060 Not used -
061 Not used -
062 Not used -
063 Not used -
064 Not used -
065 Not used -
066 Not used -
067 Not used -
068 Not used -
069 Not used -
070 Not used -
071 Not used -
072 Not used -
073 Not used -
074 Not used -
075 Not used -
076 Not used -
077 Not used -
078 Not used -
079 Not used -
080 Not used -
NCU (NCU parameter setting mode)
■ TONE
Parameter No. Function Setting range
001 Tone signal sending time (PSTN) 10 to 9,999 msec
002 Minimum pause time (PSTN) 10 to 9,999 msec
■ PULSE
Item/Parameter No. Function Setting range
FORM Pulse digit format 0 -> DP (N)
1 -> DP (N+1)
2 -> DP (10-N)
001 Not used
002 Not used
003 Pulse dial make ratio 10 to 90 %
8. Service Mode
270