Canon imageCLASS MF264dw - Page 261

COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > MISC-P > OUTPUT
CNTR Output counter report
Detail To output counter values that indicate usage of functions (reading, recording, communication and
copy).
Use Case
When checking the counter
Adj/Set/Operate Method
Select the item
Caution
When executing report output, be sure to load paper in the Pickup Tray and remove paper on the
Multi-purpose Tray.
If there are papers on the Multi-purpose Tray, report will not be output even papers are placed in
a cassette.
ERR-LOG Output error log report
Detail To output jam log and error log.
Use Case
When checking error log
Adj/Set/Operate Method
Select the item
Caution
When executing report output, be sure to load paper in the Pickup Tray and remove paper on the
Multi-purpose Tray.
If there are papers on the Multi-purpose Tray, report will not be output even papers are placed in
a cassette.
SPEC Output spec report
Detail To output the current machine specifications including country, model information, ROM version.
Use Case
When checking the current machine specifications such as country, model information, ROM
version.
Adj/Set/Operate Method
Select the item
Caution
When executing report output, be sure to load paper in the Pickup Tray and remove paper on the
Multi-purpose Tray.
If there are papers on the Multi-purpose Tray, report will not be output even papers are placed in
a cassette.
KEY-HIST Output key log report
Detail To output the key log up to the time the send task was input (by pressing the Start key).
Adj/Set/Operate Method
Select the item
Caution
When executing report output, be sure to load paper in the Pickup Tray and remove paper on the
Multi-purpose Tray.
If there are papers on the Multi-purpose Tray, report will not be output even papers are placed in
a cassette.
Supplement/Memo
Fax model only
CRG-LOG Output toner/drum ctrdg log dtl print
Detail To output the toner/drum cartridge log information (serial number, remaining level, installed hours,
etc.) stored in an equipment.
Adj/Set/Operate Method
Select the item
Caution
When executing report output, be sure to load paper in the Pickup Tray and remove paper on the
Multi-purpose Tray.
If there are papers on the Multi-purpose Tray, report will not be output even papers are placed in
a cassette.
8. Service Mode
253