TESTMODE (Service mode for test print, operation check, etc.) > SCAN (SCAN Test Mode)
TESTMODE (Service mode for test print, operation check, etc.) > SCAN (SCAN Test Mode) > ADFTEST
COUNT Document counter in test mode
Detail To display the number of picked up document at the execution of Start.
Adj/Set/Operate Method
N/A (Display only)
Unit
Number of times
Default Value
0
Related Service Mode
TESTMODE > SCAN > ADFTEST > SPEED
TESTMODE > SCAN > ADFTEST > 2-SIDE
TESTMODE > SCAN > ADFTEST > START
Supplement/Memo
Count indicates "2" when 2-SIDE is ON.
START Execute ADF feed test
Detail Execute the feed test of ADF original at the settings specified at SPEED and 2-SIDE.
Adj/Set/Operate Method
Feeding is started by placing the originals in the ADF Tray and press Start.
Related Service Mode
TESTMODE > SCAN > ADFTEST > SPEED
TESTMODE > SCAN > ADFTEST > 2-SIDE
TESTMODE > SCAN > ADFTEST > COUNT
■ BOOKFEED
TESTMODE (Service mode for test print, operation check, etc.) > SCAN (SCAN Test Mode) > BOOKFEED
PAGE No. of scanned orgnl: Start to STOP
Detail To display number of scanned originals at copyboard reading.
Adj/Set/Operate Method
N/A (Display only)
Unit
Number of times
Default Value
0
Related Service Mode
TESTMODE > SCAN > BOOKFEED > SPEED
TESTMODE > SCAN > BOOKFEED > START
TESTMODE > SCAN > BOOKFEED > STOP
SPEED Specify reader motor rotation speed
Detail To specify the Reader Motor.
Adj/Set/Operate Method
Select the setting value
Display/Adj/Set Range
STDFAX
FINEFAX
SFINEFAX
RGB 600dpi
RGB 300dpi
RGB 150dpi
Gray 600dpi
Gray 300dpi
Gray 150dpi
Mono 600dpi
Mono 300dpi
Mono 150dpi
Related Service Mode
TESTMODE > SCAN > BOOKFEED > PAGE
TESTMODE > SCAN > BOOKFEED > START
TESTMODE > SCAN > BOOKFEED > STOP
START Start document scan operation test
Detail To start document scanning operation test according to the setting as specified in SPEED.
Adj/Set/Operate Method
Scanning operation is started by pressing Start.
Related Service Mode
TESTMODE > SCAN > BOOKFEED > PAGE
TESTMODE > SCAN > BOOKFEED > SPEED
TESTMODE > SCAN > BOOKFEED > STOP
8. Service Mode
276
To Next Page
Loading...
