2. After the trailing edge of the original reached the Document Delivery Unit, DADF motor (M4) is rotated counterclockwise to
reverse the original.
3. After feeding the original for the certain period of time and at the timing the DADF Solenoid (SL4) is driven, DADF Motor
(M4) is rotated clockwise.
4. The Contact Image Sensor read the 2nd side of the original when the original, which is fed to the duplex path, is passing
through the copyboard glass
5. The original is reversed by rotating the DADF Motor (M4) counterclockwise after the trail edge of the original reached the
Document Delivery Unit.
6. After feeding the original for the certain period of time and at the timing the DADF Solenoid (SL4) is driven, DADF Motor
(M4) is rotated clockwise.
2. Technology
26
To Next Page
Loading...
