Canon LBP710Cx - Page 159

[Matching Mode]
Select the processing mode for color printing.
[ICC Prole] Use a prole for color matching.
[Gamma] Perform color correction by setting a gamma value for brightness adjustment.
[RGB Source Prole]
Select a suitable prole for RGB data that matches the monitor that you are using. For XPS les, you can set
this item for each of image types contained in one document: [Text], [Graphics], and [Image].
[sRGB v3.0 (Canon)]
An RGB prole is used that is similar to an average prole of most Windows PC
monitors. When using a monitor that supports sRGB, you can print colors
close to the colors displayed on the monitor.
[Canon HDTV gamma 1.5 to 2.4
Monitor]
When you want a brightness adjustment after making comparison between
the printed colors and the colors displayed on the monitor, make a necessary
setting here. The higher the value, the darker the printed colors.
[None] Performs color separation from RGB data to CMYK without applying any RGB
source prole.
● For XPS les, this item is available when [Matching Mode] is set to [ICC Prole].
[CMYK Simulation Prole]
You can select a simulation target when printing CMYK data. The machine converts CMYK data to a device-
dependent CMYK color model in accordance with the selected simulation target.
[JapanColor(Canon)]
Use the JapanColor prole. Printing is performed in colors that are close to the
Japanese printing standards.
[U.S. Web Coated v1.00 (Canon)] Use the U.S. Web Coated prole. Printing is performed in colors that are close to the
U.S. printing standards.
[Euro Standard v1.00 (Canon)] Use the Euro Standard prole. Printing is performed in colors that are close to the
European printing standards.
[None] Prints CMYK data using a device-dependent CMYK color model without applying any
CMYK simulation prole.
● When this item is set to [None], dark color gradation may collapse depending on the data.
[Output Prole]
You can select suitable proles for data that you are going to print. For PDF les and XPS les, you can set
this item for each of image types contained in one document: [Text], [Graphics], and [Image].
[Normal]
Color matching is performed so that data is printed in colors close to the colors
displayed on the monitor.
[Photo] Color matching is performed so that the print result is similar to photography.
Printing a Document
153