Canon LBP710Cx - Page 160

[TR Normal] Color matching is performed so that data is printed in colors close to the colors
displayed on the monitor and that bleeding of toner into text and ne lines is well
controlled.
[TR Photo] Color matching is performed so that the print result is similar to photography and that
bleeding of toner into text and ne lines is well controlled.
● For XPS les, this item is available when [Matching Mode] is set to [ICC Prole].
[Matching Method]
Specify which element to be given priority over others in color matching by [RGB Source Prole]. For XPS les,
you can set this item for each of image types contained in one document: [Text], [Graphics], and [Image].
[Perceptual]
Matching is performed with priority given to perceptual.
[Saturation] Matching is performed with priority given to saturation.
[Colorimetric] Matching is performed so that color difference between originals and printouts is
minimized.
[Use Grayscale Prole]
With this check box selected, gray data is converted to CMYK data according to the machine's grayscale
prole.
● Printing may be performed only with K (black) toner depending on the setting of [Output Prole] or [Use
Pure Black Text].
[Use Pure Black Text]
With this check box selected, black text is printed with K (black) toner only. Unlike printing with color (CMY)
toner, color toner slurring around the edges will not occur. It is recommended that normally you use this
setting.
[Black Overprint]
Set how to print when black text is overlapped on a color background or color gure with [Use Pure Black
Text] selected. With this check box selected, rst only the color background or gure is printed and then the
black text is printed onto the background or gure with black (K) toner alone. With this check box deselected,
rst the data is printed after the black text is cut out from the color background or gure, leaving the
corresponding white blank, and then the black text is printed on the white blank.
● With this check box deselected, the print may be fainter or the edges of the text may be rimmed with
white.
[Perfrom Composite Overprinting]
With this check box selected, CMYK data for which overprint is set will be overprinted as composite data.
● When [CMYK Simulation Prole] is set to other than [None], overprint is not performed even if this check
box is selected.
Printing a Document
154