Canon LBP710Cx - Page 380

( ) <Control Menu> <PDL Selection (PnP)> Check the message
Select the page description language Perform a hard reset ( Performing a
Hard Reset(P. 498) )
Mng. Settings
Select whether to restrict the use of the ( ) key on the operation panel to prevent any settings from being
changed carelessly.
Settings Key Lock
If you select <On>, the Setup menu is not operable even if ( ) is pressed.
Off
On
( ) <Control Menu> <Mng. Settings> <Settings Key
Lock> Check the message <Off> or <On>
● If you select <On>, the Settings key can be unlocked from the Remote UI only. Restricting
Operation Panel Functions(P. 288)
RMT-SW
Use this machine leaving this item set to <Off>. You may be asked to change the setting to <On> to allow for remote
maintenance on your machine by a Canon service representative.
Off
On
( ) <Control Menu> <RMT-SW> <Off> or <On>
Adjust Screen
You can adjust the contrast and brightness of the display.
Setting Menu List
374