Image data type
Select the image data type for which the settings are changed. Select <Text> for characters, <Graphics> for
lines and gures, or <Image> for images such as photos.
<sRGB v3.0 (Canon)>
An RGB prole is used that is similar to an average prole of most Windows PC monitors. When using a
monitor that supports sRGB, you can print colors close to the colors displayed on the monitor.
<Canon HDTV gamma 1.5> to <Canon HDTV gamma 2.4>
When you want a brightness adjustment after making comparison between the printed colors and the colors
displayed on the monitor, make a necessary setting here. The higher the value, the darker the printed colors.
● This item is available when <CMS/Gamma> is set to <CMS>.
Output Prole
You can select suitable proles for data that you are going to print. You can set this item for each of the types of
image contained in one document.
Text
Normal
Photo
Graphics
Normal
Photo
Image
Normal
Photo
(
)
<Print Quality>
<CMS>
<Output
Prole> Select the image
data type
<Normal> or <Photo>
Setting Menu List
408
To Next Page
Loading...
