Canon LBP710Cx - Page 537

IE Check auth. settings
The IEEE802.1X authentication method differs between the machine and the authentication server.
● Select the correct IEEE802.1X authentication method.
Conguring IEEE 802.1X Authentication(P. 312)
IE No reply from the destination.
An error has occurred during communication for IEEE802.1X authentication with the authentication
server.
● Check whether the LAN cable is securely connected.
IE Set necessary authentication info.
The information specied for IEEE802.1X authentication is not sucient.
● Check the IEEE802.1X settings, and specify the settings properly.
Conguring IEEE 802.1X Authentication(P. 312)
IE Set the correct authentication info.
An error has been returned from the authentication server because the certicate to be used for
IEEE802.1X authentication is not specied or it is invalid.
● The certicate to be used for TLS authentication is not specied or it is invalid. Check the certicate, and
specify the valid certicate.
Conguring IEEE 802.1X Authentication(P. 312)
● If the certicate in the machine is valid, check the CA certicate of the authentication server.
The login name to be used for IEEE802.1X authentication is not specied.
● The login name to be used for IEEE802.1X authentication is not specied. Specify the login name.
IE The certicate has expired.
The certicate received from the authentication server has been found to have expired during
IEEE802.1X authentication.
● Check the certicate of the authentication server.
● Check the time settings in the machine and authentication server.
Date/Time Settings(P. 370)
IE The certicate is incorrect.
An error has occurred as a result of verication of the certicate received from the authentication server
by using the CA certicate during IEEE802.1X authentication.
● Check the certicate of the authentication server.
● Install the CA certicate in the machine.
Using CA-issued Key Pairs and Digital Certicates(P. 329)
IEEE802.1X error. Set the necessary auth. information.
The information specied for IEEE802.1X authentication is not sucient.
● Check the IEEE802.1X settings, and specify the settings properly.
Troubleshooting
531