Canon LBP710Cx - Printing Problems

The optional paper feeder has been detached when the machine is ON.
● Shut down the machine, properly install the optional paper feeder, and then turn ON the power.
Turning ON/OFF the Power(P. 34)
The connection part of the optional paper feeder has a contact failure.
● Shut down the machine, unplug the power plug from the AC power outlet, and then contact your local
authorized Canon dealer.
Turning OFF the Power (Performing a Shutdown)(P. 34)
XPS document data error.
XPS data is damaged.
● Check that XPS data is not damaged and that the XPS data format is supported by the machine, and then
try printing the document again.
A large le has been sent by Direct Print.
● Optimize the XPS le to reduce its size or retry printing after dividing the le.
● Install the SD card, and then resend the data to the machine.
Installing an SD Card(P. 633)
● Send the data from the USB memory device to the machine.
Printing from USB Memory (USB Direct Print)(P. 118)
● When you press ( ), the print job is canceled.
XPS font data error.
Font data analysis has failed.
● Replace the font data in the XPS le, and try printing the le again.
● You can press ( ) to continue printing. However, characters with errors are not printed.
XPS image data error.
Image data is damaged.
● Replace the image data in the XPS le, and try printing the le again.
● You can press ( ) to continue printing. However, images with errors are not printed.
XPS page data error.
A page cannot be generated due to an invalid description.
● Check the description of the page with the error, and try printing the le again.
● You can press
( ) to continue printing. However, pages with errors are not printed.
Troubleshooting
539