entered, you can identify which device status the e-mail is about.
Applying the Downloaded Firmware
You can apply the downloaded firmware to the printer.
1
Start the Remote UI, and then log in as Administrator.
"e-Manual"
2
From the top page of the Remote UI, click [Settings/Registration] → [License/Other] →
[Register/Update Software].
NOTE
Delivery Schedule and Timing to Apply
When the Delivery Schedule is set to [Deliver now] and the Timing to Apply is set to [Auto]
The firmware is applied after the new firmware is downloaded from the delivery server. When the
application is completed, the printer automatically restarts.
When the Delivery Schedule is set to [Deliver now] and the Timing to Apply is set to [Manual]
The new firmware is downloaded.
When the Delivery Schedule is set to [Deliver at specified date and time]
The scheduled delivery is set to the specified date/time.
NOTE
If the Timing to Apply in Delivery Settings is set to [Auto], this step is not necessary.
4
To Next Page
Loading...
