Step Action Remarks
3 Click on – Save Reports to USB-
and all reports will be saved to the
USB key
Durable list
The durable list on the PRISMAsync Local User Interface is derived from the DRBL’s and PRDC as
present on the P-print. The parts with the highest lifetime percentage are on top.
In service operations some parts are not actively monitored and thus counters are not reset.
Part counters with a threshold of -0- (zero) will be ignored by PRISMAsync and not displayed on
the LUI.
Advice
To have an accurate list of parts in the durable list it is advised to set the threshold value of –non
actively monitored parts- in engine service mode to -0-.
Example:
In picture 1 the lifetime of ITB-WEB and DEV-P-X are displayed. Go to service mode > Copier>
Counter> AVE-DRB1 and set the threshold to -0-. In picture 2 the ITB-WEB and DEV-P-X parts are
no longer displayed. Result; a more accurate list.
[33] Picture 1
4
Engine reports
156 Chapter 11 - Appendix
PRISMAsync V3.2
To Next Page
Loading...
Need help?
General
