step Action additional Info
1
Firmware upgrade
Select [Firmware Upgrade].
2
Insert USB key with printer and options
firmware in the PRISMAsync
3
Firmware upgrade
1.
Select the correct firmware to install
(iPC7010S)
2. Press 'Upgrade' to start the upgrade
process.
IMPORTANT
Do not switch off the PRISMA-
sync and the printer during the
installation process.
4
Firmware upgrade; validation
As a first step a validation of the firm-
ware will take place.
4
Firmware upgrade of Engine and Accessories
Chapter 8 - Firmware upgrades via PRISMAsync 83
PRISMAsync V3.2
To Next Page
Loading...
Need help?
General
