Canon PRISMAsync v3.2 - Page 87

step Action additional Info
2
Set DIP switches
Set the printer in Safe Download Mode
by setting switch SW1 to 'ON' (Upper
position)
3
Switch on PRISMAsync
Switch on the PRISMAsync with the
[Sleep] button.
NOTE
Do NOT switch on the printer.
Enter Service Mode
step Action additional Info
1
Go to service mode
When the splash-screen is shown, press
the [go to service mode] button.
2
Logon to service mode
In the next screen, enter the Service
Password.
4
Firmware upgrade of Engine and Accessories (safe download mode)
Chapter 8 - Firmware upgrades via PRISMAsync 87
PRISMAsync V3.2